Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 6: Remote Commands
Efficient Networks
®
Page 6-49
remote setiptranslate
Controls Network Address Translation on a per remote router basis. It allows several
PCs to share a single IP address to the Internet. The remote router must assign the
source WAN IP address to the routers’ local WAN port. This command requires that
you define a Source WAN IP Address with the
remote setsrcipaddr
command.
Mgmt Class
Network (R/W)
Input Format
remote setiptranslate on | off <remotename>
Parameters
Response
Command prompt.
remote setipxaddr
Sets the IPX network number for the remote WAN connection. For more information
about IPX configuration, see IPX Routing Concepts.
Mgmt Class
Network (R/W)
Input Format
remote setIpxaddr <ipxNet> <remotename>
on | off
Enables or disables NAT.
<remotename>
a
a
ASCII string
Name of the remote router.
