Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 12: IKE/IPsec Commands
Efficient Networks
®
Page 12-45
IPSec Commands
The following commands allow you to define an IPSec connection without IKE. To
read about IPSec Security, see “
IPSec (Internet Protocol Security)” on page 5-50.
NOTE:
If you define a tunnel using IPSec commands, the keys will remain static. This could
pose a security risk and is not recommended. Use of IKE for key management is
recommended.
ipsec add
Defines an IPSec security association (SA) name.
Mgmt Class
Security (R/W)
Input Format
ipsec add <saname>
Parameters
Example
Response
Command prompt.
<saname>
a
a
ASCII string
Name for the new IPSec SA.
b
b
To see the SA names in use, use the
ipsec list
command.
-> ipsec add show_rx
