Chapter 6: Remote Commands
Efficient Networks
®
Router family
Command Line Interface Guide
Page 6-24
Efficient Networks
®
Parameters
Response
Command prompt.
<action>
One of the following command actions:
<ipaddr>
a
a
Dotted-decimal notation
Selects the host with this IP address as server.
discard
Discards the incoming server request.
me
Sends the incoming server requests to the local
router, regardless of the IP address.
<protocol>
Protocol used by the selected server.
<protocolid>
b
b
Integer
Numerical protocol ID.
tcp
TCP only.
udp
UDP only.
all
All protocols.
<first port>
First or only port as seen by the remote end. Port used by the se-
lected server.
<portid>
c
c
Integer, 0 - 65,535
Numerical port value; a value of 0 matches any
port.
ftp
File Transfer Protocol (FTP) port.
h323
H.323 port.
http
Hypertext Transfer Protocol (HTTP) port.
smtp
Simple Mail Transfer Protocol (SMTP) port.
sntp
Simple Network Management Protocol (SNMP)
port.
t120
T.120 port.
telnet
Telnet port.
tftp
Trivial File Transfer Protocol (TFTP) port.
all
All ports.
<last port>
Optional last port in the range of ports as seen by the remote end
for the server on the LAN.
<first pri-
vate port>
c
If specified, this is a port remapping of the incoming requests from
the remote end.
