SpeedStream
®
Router family
Command Line Interface Guide
Chapter 20: QoS Commands
Efficient Networks
®
Page 20-7
Parameters
Example
Example command using the optional <policy name> parameter to display only
mypolicy3 configuration information.
Response
See example above.
<policy name>
a
a
ASCII string, policy name is case-sensitive
Optional parameter that will display only the specified policy
name.
-> qos list mypolicy3
QoS: On
DiffServ: On
Queue
Priority
Code-Point
Weight
0
HIGH
0x4
10
1
MEDIUM
0x3
10
2
NORMAL
0x2
10
3
LOW
0x1
10
Number of policies : 5
QOS INFORMATION FOR <mypolicy3>
Status................................Enabled Active
Policy number ........................4
Policy hit count .....................0
Source IP ............................Not Specified
Destination IP .......................Not Specified
Source Port...........................181
Destination Port......................181
Bi-Directional........................ON
Incoming CodePoint....................2
Protocol..............................TCP
Outgoing CodePoint....................1
Queue Priority........................LOW
Scheduling............................Always on
