Chapter 4: System Commands
Efficient Networks
®
Router family
Command Line Interface Guide
Page 4-22
Efficient Networks
®
system backup pinginterval
Changes the ping interval for a group, that is, the number of seconds between pings
during a test of the addresses in the group.
To see the current ping intervals, use the
system list
command. For more information
about the ping interval and Dial Backup, see ”
Ping Interval, Number of Samples, and
Success Rate” on page 6-13
of the Technical Reference Guide.
NOTE:
If you change the ping interval to 0, the group of addresses is disabled.
Mgmt Class
Network (R/W)
Input Format
system backup pinginterval <seconds> [<group>]
Parameters
Examples
The following command changes the ping interval to 10 seconds for group 0.
The following command disables the pinging of addresses in group 1.
Response
Command prompt.
<seconds>
a
a
Integer
Number of seconds in the ping interval for the group.
<group>
b
b
integer, 0 - 65535 (0)
Optional, number of a group.
-> system backup pinginterval 10
-> system backup pinginterval 0 1
