Chapter 4: System Commands
Efficient Networks
®
Router family
Command Line Interface Guide
Page 4-8
Efficient Networks
®
system addhttpfilter
Enables blocking all devices except those within the defined IP address range from
using the HTTP protocol (for example, to browse the Web). This command can block
devices on the WAN from accessing the Web browser. This validation feature is off by
default.
NOTE:
This command does not require a reboot and is effective immediately.
NOTE:
To list the range of allowed clients, use the command system list when you are logged
in with read and write permission (be sure to log in with password). To delete
addresses from the HTTP filter, use the
system delhttpfilter
command.
For more information, see ”
Controlling Remote Management” on page 5-15
of the
Technical Reference Guide.
Mgmt Class
Security (R/W)
Input Format
system addhttpfilter <first ip addr> [<last ip addr>] | lan
Parameters
Response
Command prompt.
<first ipaddr>
a
a
Dotted-decimal notation
First IP address in the range.
<last ipaddr>
a
Last address in the range of IP addresses to be remapped.
b
b
May be omitted if the range contains only one IP address.
lan
Local Ethernet LAN.
