85
Practical Use of the PR-50
4.
If the transition effect time is controlled via MIDI, set the MIDI message to be used in
“Trans. Time Control” (controls are not accepted via MIDI when this is set to [OFF]).
The transition effect time setting is controlled with the selected MIDI message.
fig.midi04.eps
The transition effect time
(0.0–4.0 seconds) corresponds to the MIDI value (0–127).
For more details about selecting the transition effect time, refer to “Transition Effects” (p. 54).
5.
If you wish to control the volume from the MIDI device, set the MIDI message at the “Audio
Level Control” pull-down menu (if “OFF” selected, it cannot be controlled using the MIDI
device).
Control the volume with the selected MIDI message.
fig.midi04a.eps
Select a MIDI message
Select a MIDI message
PR-50_e.book 85 ページ ２００６年１１月２日 木曜日 午後６時２９分
