45
Introduction to Use of the PR-50
g. “Network”
This setting is used when the PR-50 is connected to a computer network. Included here are settings
for time servers used in adjusting the PR-50’s time and for copying material materials from
computers to the PR-50 when the PR-50 is connected to a network.
For more details about working with this, refer to “Making the Network Settings” (p. 104).
h. “Keyboard”
This is used for making the keyboard settings. Clicking the [Default] button restores the factory
settings.
i. “Mouse”
This is used for making the mouse settings. Clicking the [Default] button restores the factory settings.
j. “Touch Panel Display”
This includes the settings utilized when a touch panel display is used.
For more details about working with this, refer to “Using a Touch Panel Display” (p. 101).
k. “Automatic Disk Checking”
This determines whether or not the PR-50 will perform an automatic disk check at startup.
When “Automatic Disk Checking” is checked, the hard disk is automatically diagnosed and repaired
when the power is turned on, before Selector starts up. This function helps minimize hard disk
failures resulting from improper system shutdowns and other problems.
Depending on the number of files and the extent of any damage, if any, this function may increase
the time needed to start up the system.
l. [Done] Button
This quits the System Preferences and returns you to the Selector screen.
m. [Latency] Slider
This sets the playback latency of Presenter. Playback timing will be delayed by the frames indicated
(value is approximate and not exact). This is useful to adjust playback timing with slow-response
video equipment.
PR-50_e.book 45 ページ ２００６年１１月２日 木曜日 午後６時２９分
