114
SPECIFICATIONS
*
When V-LINK is off, the V-LINK message is ignored.
*
Settings that are received during V-LINK is on are not saved.
*
The V-LINK Initial settings (when receiving only the V-LINK ON Message) are follows:
Parameter
Assigned
Value
Clip Control Ch.
–
1
Color Control Ch.
–
1
Note Message
–
OFF
Velocity Curve
–
4 Steps
Speed Control
Pitch Bend
1.0 (100%)
Speed Range
–
0.5-1.0-2.0
Transition Time
CC#5
0
(Portamento Time)
Audio Level
OFF
0 dB
Time Trip Ctrl X
OFF
0
Time Trip Ctrl Y
OFF
0
Output Fade
OFF
0 (center)
(or V-4 Output Fade)
Output Fade Pol.
–
±
V-4 VFX A 1
OFF
0
V-4 VFX A 2
OFF
0
V-4 VFX A 3
OFF
0
V-4 VFX A 4
OFF
0
*
The address with “#” the data is transmitted by dividing to 2 byte (higher 4 bits and lower 4 bits).
Ex. When the unit transmit “BCH”, “0BH” is transmitted for first transmitting, and next, “0CH” is transmitted. The data that is not transmitted 2 byte simultaneously is ignored.
*
The value “–” is the non-corresponding parameter of the PR-50. When receiving, it is ignored.
3-2-1. System Common Preference Area
10H 20H 00H
V-LINK Color Control Assignment Area (See 3-2-3)
10H 30H 00H
V-LINK Clip Control Preference Area (See 3-2-4)
10H 40H 00H
V-LINK Color Control Preference Area (See 3-2-5)
Address
Parameter Name
Sys.Ex.Value
Meaning of Value
10H 00H 00H
V-LINK Enabled
00H - 01H
OFF, ON
10H 00H 01H
V-LINK Rx MIDI Channel (Clip)
00H - 10H
1 - 16 Ch., OFF
10H 00H 02H
V-LINK Rx MIDI Channel (Color)
00H - 10H
1 - 16 Ch., OFF
10H 00H 03H
V-LINK Note Message Enabled
00H - 02H
Note Mode: OFF, 49 keys, Assignable
10H 00H 04H
V-LINK Fast Control Enabled
–
–
10H 00H 05H
V-LINK MMC Control Mode
–
–
10H 00H 06H
V-LINK MTC Control Mode
–
–
10H 00H 07H
V-LINK Auto Mix Mode
–
–
PR-50_e.book 114 ページ ２００６年１１月２日 木曜日 午後６時２９分
