52
Introduction to Use of the PR-50
Shifting a Clip’s In Point and Out Point
The point at which a clip starts playback is called the In point, and the point where it stops playing is
called the Out point. Click
in the transport controls to shift to the In point, and click
to shift
to the Out point. When you click this while the clip is playing, playback continues after the shift; if
you click this while the clip is paused, the clip remains paused in the shifted position.
You can set the In point and Out point individually for each clip (p. 66).
You can display the clip’s current and remaining time in the video output monitor. You can also turn
display of the transport controls on and off. For more detailed information about the video output
monitor display, refer to “About the Video Output Monitor Display.”
You cannot click blank portions of clips.
About the Video Output Monitor Display
In the video output monitor you can display the clip as it is played back as well as the clip’s current
time and remaining time, the clip length, and a progress bar.
fig.monitor01.eps
Using the Progress Bar
You can use this to confirm the clip’s In and Out points and the current playback position. You can
also move playback to any desired point by clicking on the point with the mouse or dragging in the
bar, regardless of whether playback is paused or not.
Reducing Flicker in the Screen During Pause
You can make settings for playback mode during pause to reduce the amount of flickering in the
screen while playback is paused.
The settings menu is displayed when you right-click on the video output monitor.
fig.monitor.menu01.eps
When “Pause at fields” is checked, only one of the fields is displayed. Although this allows pausing
with nothing being played during rapid interlaced recording, it results in only half the vertical
resolution. Check this item only when it is required (both odd and even fields are displayed when
this is not checked).
You can also cut flickering from interlacing of still images when importing materials (p. 78).
Transport control
Progress bar
Clip current time and length
Clip remaining time
PR-50_e.book 52 ページ ２００６年１１月２日 木曜日 午後６時２９分
