96
Practical Use of the PR-50
Controlling AR Series Devices
You can control the AR-3000 and other models in Roland’s AR (Audio Recorder) Series via MIDI.
When clips are played on the PR-50, Program Change and Note On messages are transmitted from
the MIDI interface’s OUT in accordance with the clips as they play.
You can have playback of the AR Series phrases switch by switching clips with the PR-50.
Connect a USB MIDI interface to the PR-50, and connect the MIDI interface’s MIDI OUT to the MIDI
IN of the AR Series device with a MIDI cable.
1.
Click the [MIDI Preferences] button in Play mode or Edit Mode.
2.
Check the “AR Control” check box.
The AR Control function is enabled.
fig.midi20.eps
3.
Set the MIDI channel to be used in controlling the AR in “Tx Channel” in “AR Control.”
fig.midi21.eps
The AR Series phrases correspond to the PR-50’s clips as described below.
4.
Click the [Done] button
For more detailed information on operating the AR Series, refer to the Owner’s Manual included with
the AR Series device.
When controlling an AR, set the Note Trigger setting of the AR Series device to “Trigger.”
Clip
Phrase
Palette 1, Clip 1
A0001
↓
↓
Palette 1, Clip 32
A0032
Palette 2, Clip 1
A0033
↓
↓
Palette 20, Clip 32
A0640
Mark the checkbox
Select the MIDI channel
PR-50_e.book 96 ページ ２００６年１１月２日 木曜日 午後６時２９分
