56
Introduction to Use of the PR-50
Assigning Materials to Palettes
Clips in the palette can be arranged in any order you like. You can assign materials to the clips. Select
materials from the Materials list.
This procedure is carried out in the Edit Mode screen (p. 40).
fig.editmode03.eps
1.
Switch to Edit mode.
The Edit Mode screen is displayed when you click the [Edit Mode] button in the upper right of the
Play Mode screen.
2.
Click one palette from the “Palettes” list to select the palette.
The “Clips” list for the selected palette appears.
3.
Assign materials to the palettes as clips.
Select and drag one material from the “Materials” list and drop it in the position in the “Clips” list to
which you want the material assigned.
You can confirm the clip in the video output monitor and the material in the thumbnails.
fig.editmode04.eps
When you drop a material in a position where a clip is already assigned, the earlier material is
replaced by the one you drop there.
When you select multiple materials (select materials while holding down the Shift key) and drop
them into the “Clips” list, the materials are assigned in order of the material list, starting from the
position where they are dropped.
Palletes list
Materials list inside project
Clips list
Clip preview monitor
Thumbnail
PR-50_e.book 56 ページ ２００６年１１月２日 木曜日 午後６時２９分
