Edge-Core ECS4120-28F, Reference Manual, Page: 913 / 938

Glossary
– 913 –
MSTP
Multiple Spanning Tree Protocol can provide an independent spanning tree for different
VLANs. It simplifies network management, provides for even faster convergence than RSTP
by limiting the size of each region, and prevents VLAN members from being segmented
from the rest of the group.
Multicast Switching
A process whereby the switch filters incoming multicast frames for services for which no
attached host has registered, or forwards them to all ports contained within the designated
multicast VLAN group.
MVR
Multicast VLAN Registration is a method of using a single network-wide multicast VLAN to
transmit common services, such as such as television channels or video-on-demand, across
a service-provider’s network. MVR simplifies the configuration of multicast services by using
a common VLAN for distribution, while still preserving security and data isolation for
subscribers residing in both the MVR VLAN and other standard or private VLAN groups.
NTP
Network Time Protocol provides the mechanisms to synchronize time across the network.
The time servers operate in a hierarchical-master-slave configuration in order to
synchronize local clocks within the subnet and to national time standards via wire or radio.
OAM
Operation, Administration, and Maintenance provides remote management tools
required to monitor and maintain the links to subscriber CPEs (Customer Premise
Equipment). This section describes functions including enabling OAM for selected
ports, loopback testing, and displaying remote device information.
Out-of-Band
Management
Management of the network from a station not attached to the network.
Port Authentication
See IEEE 802.1X .
Port Mirroring
A method whereby data on a target port is mirrored to a monitor port for troubleshooting
with a logic analyzer or RMON probe. This allows data on the target port to be studied
unobstructively.
Port Trunk
Defines a network link aggregation and trunking method which specifies how to create a
single high-speed logical link that combines several lower-speed physical links.
QinQ
QinQ tunneling is designed for service providers carrying traffic for multiple customers
across their networks. It is used to maintain customer-specific VLAN and Layer 2 protocol
configurations even when different customers use the same internal VLAN IDs.