Edge-Core ECS4120-28F, Reference Manual, Page: 120 / 938

Chapter 4
| System Management Commands
File Management
– 120 –
can be copied to the FTP/TFTP server, but cannot be used as the destination on the
switch.
Table 17: Flash/File Commands
Command Function Mode
General Commands
boot system Specifies the file or image used to start up the system GC
copy Copies a code image or a switch configuration to or from
flash memory or an FTP/TFTP server PE
delete Deletes a file or code image PE
dir Displays a list of files in flash memory PE
umount usbdisk Prepares the USB memory device to be safely removed PE
whichboot Displays the files booted PE
Automatic Code Upgrade Commands
upgrade opcode auto Automatically upgrades the current image when a new
version is detected on the indicated server GC
upgrade opcode path Specifies an FTP/TFTP server and directory in which the
new opcode is stored GC
upgrade opcode reload Reloads the switch automatically after the opcode upgrade
is completed GC
show upgrade Shows the opcode upgrade configuration settings. PE
TFTP Configuration Commands
ip tftp retry Specifies the number of times the switch can retry
transmitting a request to a TFTP server GC
ip tftp timeout Specifies the time the switch can wait for a response from a
TFTP server before retransmitting a request or timing out
for the last retry GC
show ip tftp Displays information about TFTP settings PE