manualshive.com logo in svg

Edge-Core ECS4120-28F, Reference Manual, Page: 614 / 938

Share
Download
Edge-Core ECS4120-28F Reference Manual Download Page 614

Chapter 22

  |  Class of Service Commands

Priority Commands (Layer 3 and 4)

–  614  –

qos map trust-mode

This command sets QoS mapping to DSCP or CoS. Use the 

no

 form to restore the 

default setting. 

Syntax 

qos map trust-mode

 {

cos

 | 

dscp

 | 

ip-prec

}

no qos map trust-mode

cos

 - Sets the QoS mapping mode to CoS.

dscp

 - Sets the QoS mapping mode to DSCP.

ip-prec

 - Sets the QoS mapping mode to IP Precedence.

Default Setting 

CoS

Command Mode 

Interface Configuration (Port)

Command Usage 

◆

If the QoS mapping mode is set to IP Precedence with this command, and the 
ingress packet type is IPv4, then priority processing will be based on the IP 
Precedence value in the ingress packet. 

◆

If the QoS mapping mode is set to DSCP with this command, and the ingress 
packet type is IPv4, then priority processing will be based on the DSCP value in 
the ingress packet. 

◆

If the QoS mapping mode is set to either IP Precedence or DSCP, and a non-IP 
packet is received, the packet's CoS and CFI (Canonical Format Indicator) values 
are used for priority processing if the packet is tagged. For an untagged packet, 
the default port priority (see 

page 604

) is used for priority processing.

◆

If the QoS mapping mode is set to CoS with this command, and the ingress 
packet type is IPv4, then priority processing will be based on the CoS and CFI 
values in the ingress packet. 

For an untagged packet, the default port priority (see 

page 604

) is used for 

priority processing.

Example 

This example sets the QoS priority mapping mode to use DSCP based on the 
conditions described in the Command Usage section.

Console(config)#interface ge1/1

Console(config-if)#qos map trust-mode dscp 

Console(config-if)#

Summary of Contents for ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments