manualshive.com logo in svg

Edge-Core ECS4120-28F, Reference Manual, Page: 130 / 938

Share
Download
Edge-Core ECS4120-28F Reference Manual Download Page 130

Chapter 4

  |  System Management Commands

File Management

–  130  –

Command Usage 

◆

This command is used in conjunction with the 

upgrade opcode auto

 command 

to facilitate automatic upgrade of new operational code stored at the location 
indicated by this command. 

◆

The name for the new image stored on the TFTP server must be ECS4120-
Seroes.bix. However, note that file name is not to be included in this command.

◆

When specifying a TFTP server, the following syntax must be used, where 

filedir

 

indicates the path to the directory containing the new image: 

tftp://192.168.0.1[/filedir]/

◆

When specifying an FTP server, the following syntax must be used, where 

filedir

 

indicates the path to the directory containing the new image: 

ftp://[username[:password@]]192.168.0.1[/filedir]/

If the user name is omitted, “anonymous” will be used for the connection. If the 
password is omitted a null string (“”) will be used for the connection.

Example

This shows how to specify a TFTP server where new code is stored.

Console(config)#upgrade opcode path tftp://192.168.0.1/sm24/

Console(config)#

This shows how to specify an FTP server where new code is stored.

Console(config)#upgrade opcode path ftp://admin:[email protected]/sm24/

Console(config)#

upgrade opcode

reload

This command reloads the switch automatically after the opcode upgrade is 
completed. Use the 

no

 form to disable this feature.

Syntax 

[

no

]

 upgrade opcode reload

Default Setting 

Disabled

Command Mode 

Global Configuration

Summary of Contents for ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments