Eclipse CD5444 Owner'S Manual Download

Page: 48 / 152

Basic operation

Adjust the display contrast to the best level in accordance with
the angle of viewing.

Turn the [SEL] button to select CONTRAST.

Press the [SEL] button.

Enters contrast adjustment mode.

Turn the [SEL] button to adjust contrast.

When the button is turned, the contrast level changes in the
following order.

Press the [RTN] button.

At this time, other adjustments can also be made in display
adjustment mode.

Press the [DISP] or [RTN] button to exit display
adjustment mode.

Contrast adjustment

Turn the [SEL] button to select ILL COLOR.

Press the [SEL] button.

The screen for changing the illumination color will appear.

Turn the [SEL] button to select GREEN or RED.

Press the [RTN] button.

At this time, other adjustments can also be made in display
adjustment mode.

Press the [DISP] or [RTN] button to exit display
adjustment mode.

Changing illumination Color

[SEL] button

[RTN] button

[DISP] button

-5

-4

-3

-2

-1

Summary of Contents for CD5444

























































































































































Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands

Eclipse CD5444, Owner'S Manual

Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands