Eclipse CD5444 Page 17 Owner'S Manual Download

Page: 17 / 152

Operating precautions

• Do not use Memory Sticks with labels that are

peeling off or that have name tags (labels)
attached.

• Store Memory Sticks in places away from direct

sunlight and high humidity, otherwise the Memory
Sticks may become unusable.

• Place Memory Sticks in their protective cases

during transportation and storage.

• Do not touch the terminals with your hands or with

metallic objects.

• When removing the ejected Memory Stick, pull it

straight out along the slot. Pressing downward in
the process may scratch the recorded surface of
the Memory Stick.

OKAY

NO GOOD

• MG Memory Stick supplied is not formatted. MG

Memory Stick must be formatted prior to use.
"Formatting MG Memory Stick (quick format)" on
page 77 for instructions on formatting MG Memory
Sticks.

• It may not be possible to use MG Memory Sticks

that have just been purchased. If this happens,
use the unit to format the MG Memory Stick. Refer
to "Formatting MG Memory Stick (quick format)"
on page 77 for instructions on formatting MG
Memory Sticks.

• Some recordings and other data may not be

played back or writing/reading, depending on the
device that was used to save the data.

Summary of Contents for CD5444

























































































































































Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands

Eclipse CD5444, Owner'S Manual

Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands