Eclipse CD5444 Page 55 Owner'S Manual Download

Page: 55 / 152

How to operate the CD player

Repeating the same track (REPEAT)

Press button [5] to repeat the track being played.

To cancel, press button [5] again.

Playing tracks in random order (RANDOM)

Press button [6] to play the tracks in random order.

To cancel, press button [6] again.

ATTENTION

•During random playback, press button [5] to repeat the track

being played. To cancel repeat play (go back to random play),
press button [5] again.

During playback of a particular track: The track being played is
played repeatedly.
While searching: The following track is played repeatedly.

•Occasionally the same track happens to be played (selected)

two or more times in a row; this is normal operation and is no
sign of a problem.

•When any of the functions - “Playing the beginning of tracks,”

“Repeating the same track” and “Playing tracks in random
order” - is selected, a message such as [SCN], [RPT] or
[RAND] appears on the display to verify the current function.

Buttons [5] and [6]

Summary of Contents for CD5444

























































































































































Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands

Eclipse CD5444, Owner'S Manual

Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands