Eclipse CD5444 Owner'S Manual Download

Page: 53 / 152

How to operate the CD player

Listening to CDs

Press the [DISC] button to switch to the CD player mode.

First press the [DISC] button to switch to the disc mode. It is
assumed here that a CD has already been loaded into the unit.

How to operate the CD player

[DISC] button

This starts CD play.
Disc mode will switch from CD player

➔

Memory Stick player in

order each time the button is pressed.
If an external CD changer is connected, each additional press
of the [DISC] button will switch modes from CD changer 1

➔

CD changer 2

➔

Memory Stick player

➔

CD player.

A changer or player with no discs loaded will be skipped.

•Playback may be intermittent when there is a scratch on a CD

or when the recorded side is dirty.

•Only two external CD changers may be connected.

Caution

Summary of Contents for CD5444

























































































































































Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands

Eclipse CD5444, Owner'S Manual

Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands