Eclipse CD5444 Owner'S Manual Download

Page: 51 / 152

Basic operation

This receiver uses the 12-hour display notation.

Turn the [SEL] button to select CLOCK ADJ.

Press the [SEL] button.

The clock adjustment mode is activated.

Turn the [SEL] button to display the item to be selected
for adjustment.

Hours, minutes or exact hour will be switched each time the
button is turned.

Press the [SEEK

/FAST

] button.

[SEEK

] button: Turns the time forward.

[FAST

] button: Turns the time back.

To set the clock to 0 minutes, 0 seconds (an exact hour),
press the [SEEK

/FAST

] button.

For example:
At 3:29: Pressing the [SEEK

/FAST

] button returns to 3:00.

At 3:30: Pressing the [SEEK

/FAST

] button advances to 4:00.

Press the [RTN] button.

At this time, other adjustments can also be made in
function mode.

Press the [FUNC] or [RTN] button to exit function mode.

Setting the Time

[SEL] button

[FAST

] button

[FUNC] button

[SEEK

] button

[RTN] button

Summary of Contents for CD5444

























































































































































Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands

Eclipse CD5444, Owner'S Manual

Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands