Eclipse CD5444 Owner'S Manual Download

Page: 66 / 152

How to operate the MP3 player

Advancing to the next track (file) or returning to
the beginning of the track (file) being played

Turn the [SEL] button to the left or right.

Turn to the right: Advances to the next track (file).
Turn to the left:

Returns to the beginning of the track (file)
being played.
Repeat turning for previous tracks (files).

Skipping to the next or previous folder

Press button [1] or [2].

Button [1]: Selects the next folder.
Button [2]: Selects the next lower folder.

Return to the root directory of the CD

Press the [RTN] button.

In the root directory, when a file cannot replay, the system will return
to the first file that can perform a replay. (In the configuration
example, the file is returning to 001.mp3. See page 63.)

[RTN] button

[SEL] button

Buttons [1] and [2]

Summary of Contents for CD5444

























































































































































Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands

Eclipse CD5444, Owner'S Manual

Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands