Eclipse CD5444 Owner'S Manual Download

Page: 134 / 152

134

If you have a question:

Displayed information (for troubleshooting)

The information listed in the chart below is displayed to show the
status of the CD, Memory Stick player and CD changer. Refer to the
chart for the appropriate action.

INFO 2 NO DISC LOADED IN

THE MAGAZINE

There is no disc in the magazine or player. Load a
disc in the magazine. (Load a music disc.)

Information Contents

Explanation and remedial action to take

INFO 3 DISCS ARE DIRTY OR

DAMAGED

The loaded disc is dirty or upside down. Check it
for proper orientation and verify it is clean.

INFO 5 CD PLAYER AND CD

CHANGER FAILS
MECHANICALLY

•The CD player and CD changer is inoperative for

some reason. Go through the magazine removal
procedure.

•If a magazine fails to eject, have your dealer fix

problem.

INFO 6 WHEN THE CD

CHANGER INTERNAL
TEMPERATURE IS
HIGH (TO PROTECT
PICKUP UNIT)

•The temperature in the CD changer is too high for

operation. Wait till it cools down.

•Resume playing after the “High temperature

sensed and CD stopped" display disappears. If
the CD still cannot play, have your dealer repair it.

INFO 7 AN INTERNAL POWER

SUPPLY FAILURE IS
OCCURRING WITH
THE AUTO CHANGER

•Turn the ACC off once before turning it on once

again to resume the operation.

•If the function still cannot be restricted, contact

your dealer.

LOAD

CD changer is in the process of verifying the
presence of CDs after a magazine has been
inserted into the CD changer.

Summary of Contents for CD5444

























































































































































Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands

Eclipse CD5444, Owner'S Manual

Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands