Eclipse CD5444 Owner'S Manual Download

Page: 50 / 152

Basic operation

The receiver is set at the factory to emit a beep tone in
response to button operation. The guide tone feature may be
disabled in the following procedure:

Turn the [SEL] button to select GUIDE TONE.

Press the [SEL] button.

The Guide Tone Mode will be switched ON/OFF.

Turn the [SEL] button to select ON or OFF.

Press the [RTN] button.

At this time, other adjustments can also be made in
function mode.

Press the [FUNC] or [RTN] button to exit function mode.

Disabling the guide tone feature (for button operation)

Switches the clock display to ON/OFF.

Turn the [SEL] button to select CLOCK DISP.

Press the [SEL] button.

The clock display ON/OFF mode is activated.

Turn the [SEL] button to select ON or OFF.

Press the [RTN] button.

At this time, other adjustments can also be made in
function mode.

Press the [FUNC] or [RTN] button to exit function mode.

Clock display on/off

[FUNC] button

[SEL] button

[RTN] button

Summary of Contents for CD5444

























































































































































Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands

Eclipse CD5444, Owner'S Manual

Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands