Eclipse CD5444 Page 76 Owner'S Manual Download

Page: 76 / 152

How to operate the Memory Stick player

Deleting recorded file

Press the [FUNC] button for less than one second, when
the recording file being played back.

Turn the [SEL] button to select MS.

The recorded files being played can be deleted.

Press the [SEL] button.

The Memory Stick setting mode is activated.

The function mode is activated.

Turn the [SEL] button to select DELETE.

Press the [SEL] button.

The file delete mode is activated, then [OK] message will
appear.

Press the [SEL] button for more than two seconds.

The recorded files being played back will be deleted.

Press the [RTN] button.

At this time, other adjustments can also be made in function
mode.

Press the [FUNC] or [RTN] button to exit function mode.

[FUNC] button

[SEL] button

[RTN] button

Press the [RTN] button.

At this time, other adjustments can also be made in Memory
Stick setting mode.

Summary of Contents for CD5444

























































































































































Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands

Eclipse CD5444, Owner'S Manual

Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands