Eclipse CD5444 Owner'S Manual Download

Page: 96 / 152

How to operate the Sound Adjustment Mode

Operations during Normal Mode

Turn the [SEL] button to select a setting item.

When the button is turned, the setting item changes in the
following order.

Press the [SOUND] button for less than one second.

The mode will change to sound adjustment mode.

Press the [SOUND] button for more than two seconds.

The mode switches between normal mode and advance mode
each time the button is pressed. During normal mode,
"ADVANCE OFF" and the scroll display appear in the display.

DSP

NON-FADER

POSITION

ATTENTION

•The default setting is normal mode.
•If you press the [SOUND] button during sound adjustment

mode, the adjustment mode is canceled and the mode returns
to normal music mode.

[SEL] button

[SOUND] button

Summary of Contents for CD5444

























































































































































Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands

Eclipse CD5444, Owner'S Manual

Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands