Eclipse CD5444 Page 60 Owner'S Manual Download

Page: 60 / 152

How to operate the CD player

Deleting a previously created title

Press the [FUNC] button for less than one second while
in the Disc mode.

Hold button [6] down for more than two seconds.

The title has now been deleted.

If external CD changers are connected, a previously created title for
a CD will be deleted in the same way. It is assumed here that the
disc mode is selected.

Turn the [SEL] button to select DISC TITLE.

The CD title being played at this point will be deleted.

Press the [SEL] button.

Press the [RTN] button.

Press the [FUNC] or [RTN] button to exit function mode.

At this time, other adjustments can also be made in function
mode.

Button [6]

[FUNC] button

[SEL] button

[RTN] button

Summary of Contents for CD5444

























































































































































Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands

Eclipse CD5444, Owner'S Manual

Search results

Summary of Contents for CD5444

Reviews:

Related manuals for CD5444

Brands by name

Popular brands