14.01.2019
173/185
ARCHIV POS: XXXXX
Date: dd/mm/yy
Date
Activity XXX %
↓
The duty quotas in % (pack utilisation)
The run times of the date of row 1 are displayed by tapping the arrow
- selection max. 31 days in the past using ↑, ↓
10.1.8 Menu 7 Basic settings
All parameters of the pack controller are reset to the factory settings. The following screen is displayed:
VS3010 C POS: XXXXX
Load basic settings?
Are you sure?
NO: ESC YES:
Confirmation prompt for loading the basic parameters
10.1.9 Menu 8 Service Mode
SERVICE POS: XXXXX
1 Analogue values
Continue to menu 8-1
2 Compressors
Continue to menu 8-2
3 Condenser fans
Continue to menu 8-3
4 System
Continue to menu 8-4
5
•
Menu 8-1 Default Analogue Values
SERVICE POS: XXXXX
Input
Default Dim.
AnalogOut1 X.X V
Voltage at the analogue output 1 (terminals 53, 54) 0.0..10.0 0.0
V
AnalogOut2 X.X V
Voltage at the analogue output 2 (terminals 55, 56) 0.0..10.0 0.0
V
AnalogOut3 X.XX V Voltage at the analogue output 3 (terminals 57, 58) 0.0..10.0 0.0
V
Warning about system damage!
The basic settings should not be loaded as the controller will be
reset to values that usually have nothing to do with the real system configuration!
After kloading the basic settings, the system-specific configuration of the pack controller
must
be
performed!
Summary of Contents for VS 3015 C
Page 8: ...14 01 2019 8 185...
Page 46: ...14 01 2019 46 185...
