14.01.2019
123/185
9 Operation of VS 3015 C
Operation of the pack controller is possible via the CAN bus interface, the system centre, a store computer or
an operator terminal whereby these can be configured. No operation at the pack controller itself is possible
apart from the manual / automatic mode selection (see
). The connection of
LDSWin to the system centre (that functions as gateway for the controller) can either be made remotely (via
modem or via the network) or directly on-site (via a serial connection or the System Centre):
9.1 Operation possibilities
The controller provides menus and screens for the display and adjustment of values. However, no operation for
this is provided on the controller itself. The actual operation of these menus is performed externally using the
following possibilities:
•
Remote control via the terminal:
The controller can be operated remotely (e.g. from the machine
room) using the system centre, a store computer or an operator terminal. The communication with the
controller is performed via the CAN bus; for details about the operation, see
•
Remote control with PC software LDSWin:
A PC with LDSWin installed is connected to the system
centre or the store computer. The connection can be made here, for example, via the serial or USB
interface, a modem, a network or the PC-CAN bus adapter. In this way, the controller can be operated
very conveniently with the PC software and its powerful functions such as controller analysis,
evaluations, storing parameter sets, creating lists, etc. See the LDSWin operating manual for further
details about the range of functions.
9.2 Remote control using a terminal
Details for the connection of LDSWin to the E*LDS system can be found in the
.
Further details for the operation of a system centre, store computer or operator terminal can be found in
their operating manuals.
Summary of Contents for VS 3015 C
Page 8: ...14 01 2019 8 185...
Page 46: ...14 01 2019 46 185...
