$SSHQGL[$7HOHSKRQ\)HDWXUHV
$
*.78VHUV*XLGH
:DNHXS
Use this feature to ring your GKT at designated times. If you do not
answer the call, the GKT will ring 3 more times at 1-minute
intervals. If you do not answer by the third call, the wakeup call is
routed to the attendant.
To Enter First Wakeup Request:
1.
Press
>:DNHXS@
.
2.
ENTER TIME
via the dialing keypad.
Dial in the time you want your station to ring.
Four digits are required for a 12-hr clock (i.e. 0805 for 5
minutes past 8).
3.
Choose
>$0@
or
>30@
.
4.
Hear confirmation tone.
Other Options After 1st Entry:
1.
Press
>:DNHXS@
.
2.
Choose one of the following:
•
>1(:@
to add another Wakeup time.
•
>6&52//@
to view Wakeup list.
•
>&$1&(/@
to cancel requested Wakeup time.
When Wakeup Call Rings:
1.
The system line displays
WAKE CALL NAME/NUM
. Press
SPKR
to answer the call, Music or an announcement is heard.
2.
To have Wakeup call ring later, press
>6QRR]H@
.
:KLVSHU3DJH
Used by a third party to quietly page one party of a two party call.
The other party does not hear the whisper page. The whispering party
cannot hear the conversation between the two parties.
The whispered party can answer the whisper page while placing the
second party on hold or create a 3-way call and add the whispering
party.
This feature can also be activated while in Silent Monitor and then
the whisperer can be heard as well as hear the two parties
conversing.
1.
Press
>:KLVSHU3DJH@
.
2.
Choose station number from the Directory or dial a number.
3.
Deliver the message and disconnect.
=RQH3DJH
Use this feature to page a pre-programmed group of keyset users.
The entire group can be paged by dialing the Zone Page access code
(default dial numbers: 7300 to 7309).
1.
Dial the Zone Page Access Code or program a DSS key with the
Access Code number.
2.
Announce your message to the group.
3.
Disconnect when you finish announcing.
Note:
See your system administrator to view or define the zone
group access codes and their respective members.
