EC POWER XRGI 20G-TO, Manual

Page: 71 / 168

71
Version 1.0 - 2012 Manual XrGi 20G-To
If a fault occurs during operation, the system stops automatically. The LED on the IQ-Control Panel illuminates red to indicate
a fault. The control system reports the problem to the central database automatically via the integrated modem.
The control system provides 24-hour and weekly statistics on power consumption and generation. The two functions are
structured identically.
Alarm fault details
Press the key and the system explains why the stop alarm was set off.
The system should not be restarted without consulting a service engineer. Consequential damage as a result of restarting
improperly is not covered by the warranty.
Acknowledge alarm
Press OK to reset alarm.
4.1.3.4. alarm stop
4.1.4. power statistics
Press any key
for menu
9:58:22
9.10.2008
Production
Consumption :
0%
Status
Alarm stop
System in alarm stop
Reason for alarm stop:
Code….
Restart at your own risk as engine may be
demaged
OK
Press any key
for menu
9:58:22
9.10.2008
Production
Consumption :
0%
Status
Full Stop