EC POWER XRGI 20G-TO, Manual

Page: 10 / 168

10
Version 1.0 - 2012 Manual XrGi 20G-To
1.2. handlinG the equipment
To take best advantage of all the benefits your XRGI 20G-TO offers, please read these instructions carefully. For your own
safety, please note that your system must be set up and adjusted by an authorised EC POWER specialist only. The same ap-
plies for inspection/maintenance, servicing and repairs of the device. For a long, reliable service life, please note the following:
Have your unit inspected and maintained by an authorised EC POWER specialist at least every two years.
Keep the air inlets in walls or doors clear.
Installation is governed in particular by the rules, regulations and guidelines below:
Federal State building regulations
MFeuVo model fire regulations and/or Federal State FeuVO
BImSchV Federal emission protection regulations
Energy saving law (EnEG) and heating system regulations issued pursuant to it (HeizAnlV)
Technical rules for gas installations DVGW-TRGI 86, current edition, Wirtschafts- und Verlagsgesellschaft Gas und
Wasser mbH., Bonn
DVGW worksheet G600 (TRGI)
DIN 1988 Technical rules for drinking water installations (TRWI)
DIN 4701 Rules for calculating building heating requirements
DIN 4751 Bl. 3 Safety equipment for heating systems with lead temperatures up to 110 °C
ATV worksheet A 251 Feeding condensation water from gas- and oil-fired heating systems into the public drains and micro-
treatment plants, November 1998 edition, GFA Verlag für Abwasser, Abfall und Gewässerschutz, Hennef
Regulations on energy saving heat protection and building systems (energy saving regulations - EnEV) 16 November 2001
DIN VDE 0100 (Parts 540 and 701 in particular) and DIN VDE 0105.
Guidelines for connecting and operating local generation systems in the low voltage network of the association of German
electricity works – VDEW – e.V.
Technical connection requirements for connecting to the low voltage network of the association of German electricity works
– VDEW – e.V.
Warning! Safety devices must not be disabled, bypassed or removed.
1.2.1. operator's obligations
1.2.2. rules and standards
Danger! All connections (fuel, flue gas and electrical) as well as the initial commissioning, maintenance and
repairs must be carried out by authorised personnel only. In addition, the generally recognised technical
and architectural rules must be observed. Safety devices must be installed in accordance with local rules.
Observe Health and Safety at Work Regulations.