EC POWER XRGI 20G-TO, Manual

Page: 53 / 168

53
Version 1.0 - 2012 Manual XrGi 20G-To
Fig. 3.15.
3.3.5.2. storage Control
The sensors must be positioned as shown in Fig. 3.15. Other positions will cause operation errors!
The Storage Control Temperature Sensors must be fitted to the storage tank in immersion sleeves; sensor No. 1 must be
installed at the topmost measuring point and sensor No. 4 at the lowest measuring point.
The distance between all four temperature sensors must be identical.
If there is more than one storage tank in the system, each must have its own Storage Control unit. The Q-Network detects
the sequence of the storage tanks automatically when in operation.
All four Storage Control Temperature Sensors must be installed in the same storage tank.
If the storage tank capacity exceeds 1,000 litres, two Storage Control units must be used.
sToraGe ConTrol sToraGe ConTrol
Termination
Endwiderstand
Q-Network Heat