EC POWER XRGI 20G-TO, Manual

Page: 35 / 168

35
Version 1.0 - 2012 Manual XrGi 20G-To
Load Sharer (01ELT2006)
Scope of supply: Load Sharer Box
Size (H x W x D): 90 x 260 x 160 mm
Weight: 2 kg
The Load Sharer divides the required system output between the existing XRGI systems in power-controlled mode. It ensures
that each XRGI system is started individually. This reduces the amount of start-up current required.
A Load Sharer must be used if multiple XRGI systems are to work in power-controlled mode. In heat-controlled mode the Load
Sharer is used to start each XRGI system up separately. A Load Sharer is installed as shown in Fig. 1. Up to four XRGI systems
can be connected to one Load Sharer.
CONFIGURATION
Operation
The Load Sharer is configured at the LCD display under the cover. Next to the LCD display there are four keys:
2.2.2. power-controlled operation
2.2.2.1. load sharer
Fig. 2.32.
Fig. 2.31.
Use and to scroll through the menu.
Use ESC to return to the menu and OK to select entries.
Press OK and selection will flash.
Press the cursor keys or to select the value required.
Press OK/ESC to save the entry (the selection stops
flashing).