EC POWER XRGI 20G-TO, Manual

Page: 86 / 168

86
Version 1.0 - 2012 Manual XrGi 20G-To
6. monitorinG
If your XRGI system does not start, there are a number of points you can check yourself:
Gas stop-cock open?
Shutoff valves open?
Water level/filling pressure sufficient?
Power supply on?
Mains breaker on?
When you have checked these points and your unit still does not work, contact your authorised EC POWER specialist.
The control system monitors the XRGI system continuously and any change in operating conditions is saved as a service code.
Your XRGI system uses this monitoring data to determine whether faults arise in the engine or other areas. In addition, service
codes are useful for troubleshooting. If problems occur with your XRGI 20G-TO, a fault code will appear in the LCD display
and in the Service Database.
The list in the next sub-section shows the different service codes, the operating conditions they involve and why they may have
been displayed.
There are three different types of service code that may be displayed:
Normal change in operating status
Status change
Alarm code
6.1. Troubleshooting
6.1.1. your XrGi 20G-To system does not start
6.2. service codes
Note: always contact your authorised EC POWER specialist if there are problems
with your XRGI system.