EC-PACK EC-JET 2000, Manual

Page: 8 / 107

User Manual The1.1 version of 2018 Guangzhou EC-PACK CO.LTD
8
ENGINEERS ARE QUALIFIED TO OPEN THE FRONT INK SYSTEM
DOOR WHEN ADDING INK OR SOLVENT, ONLY FULLY TRAINED
EC-JET APPROVED SERVICE ENGINEERS ARE QUALIFIED TO
OPEN THE SCREEN DOOR OR THE BACK ACCESS DOOR TO
MAINTAIN OR ADJUST THE INTERNAL PARTS.
1.3. Operation
All users operating the printer must be aware of the following hazards associated with ink jet
printers. The following safety information should be made available to all personnel and is
applicable to anybody in the printer’s operating environment. Only fully trained and competent
personnel should operate or maintain EC-JET printers. If you are in any doubt as to your ability to
operate or maintain the printer, did not hesitate to consult your supervisor for guidance or contact
your local EC-JET distributor who will be happy to advise you.
1.
Don’t smoke or use naked flames in the vicinity of the printer. The printer contains
flammable inks and solvents.
2. Always ensure that the printer electrical supply is isolated prior to performing cleaning or
maintenance activities. Lethal voltages are present in the printer cabinet and printhead
when mains power is applied which can cause death or serious injury if the correct
electrical procedures are not observed.
3. Only the fully trained operators or service engineers qualified to open the front ink system
door to add the ink or solvent. Only fully trained EC-JET approved service engineers
qualified to open the screen door or the back access door.
4. Always check that all covers are correctly fitted and all doors are closed before you use it.
If you are not sure, ask your supervisor for guidance. Covers act as safety barriers and also
ensure the printer retains its electromagnetic compatibility.
5. It is recommended that the printer is situated at least 600mm from floor level for your
comfort.
1.4. Inks and Solvents
Whenever inks and solvents are used, safety eyeglasses to the appropriate European and
International Directives must be worn. Solvent resistant gloves must be worn when contact with
inks or solvents is likely.
The effects of solvents and inks are potentially harmful. Prior to use, ensure the printing area is
properly ventilated and the Material Safety Data Sheets have been read and fully understood. If
you are unsure, contact your supervisor for guidance.
If the Material Safety Data Sheets have not been supplied or are not available, please contact your
local EC-JET distributor. Always refer to the Material Data Safety Sheets before working with
inks and solvents.
Store all inks and solvents in original containers, in a well-ventilated cabinet and away from heat
sources. Ensure all spilt ink or ink deposits are removed immediately using the correct solvent for