manualshive.com logo in svg

EBR EBR 1190RS 2013, Owner'S Manual

Share
Download
EBR EBR 1190RS 2013 Owner'S Manual Download Page 74

OPERATING  
RECOMMENDATIONS 

General 

Motorcycles are different from other vehicles. They 
operate, steer, handle and brake differently. Un-
skilled or improper use could result in loss of control, 
death or serious injury.  

Take a rider training course

Read Owner‟s Manual before riding, adding acces-
sories or servicing.

Wear a helmet, eye protection and protective cloth-
ing.

Never tow a trailer.

Do not run the engine at extremely high RPM with 
clutch disengaged or transmission in neutral. Run-
ning an engine at high RPM can result in engine 
damage.  

Do not exceed the maximum safe RPM specified be-
low under any conditions. Exceeding the maximum 
safe engine RPM can result in equipment damage. 

The maximum recommended safe engine speed is 11500 
RPM. 
Have the engine checked regularly and keep it well 
tuned. 

Do not coast for long distances with the engine off or 
idling. The transmission is properly lubricated only 
when the engine is running. Coasting long distances 
can result in transmission damage.  

Do not tow a disabled motorcycle. Towing can ad-
versely affect stability and handling, which could 
result in death or serious injury.  

74

Summary of Contents for EBR 1190RS 2013



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands