
Electric Starter Switch
See Figure 5. The electric starter switch is located on
the right hand controls. Pushing in the electric starter
switch engages the electric starter and starts the engine
if ignition power is ON. See OPERATION, Starting the
Engine: EBR 1190RS for operation procedures.
Engine OFF/RUN Switch
See Figure 5. The engine OFF/RUN switch turns the
ignition power on or off. The engine OFF/RUN switch
is located on the right hand controls. Push the top por-
tion of the engine OFF/RUN switch to turn off ignition
power and shut the engine off. Push the bottom portion
of the engine OFF/RUN switch to turn on ignition pow-
er.
NOTES
-
The Engine OFF/RUN switch must be in the
RUN position to start or operate the engine.
-The Engine OFF/RUN switch should be used
to shut the engine off.
1. To shut the engine off, push the top of the OFF/
RUN switch to the ignition OFF position.
2. See Figure 3. Turn the ignition/headlamp key switch
counterclockwise to the OFF position to turn the
ignition power completely off.
Throttle Control Grip
See Figure 5. The throttle control grip is located on the
right handlebar and is operated with the right hand.
1. Turn throttle control grip clockwise (toward the
front of the vehicle) to close the throttle and deceler-
ate.
2. Turn the throttle control grip counterclockwise
(toward the rear of the vehicle) to open the throttle
and accelerate.
52
Summary of Contents for EBR 1190RS 2013
