Eaton VoCALL 16 Installation And Operation Manual Download Page 20

Page: 20 / 116

InStALLAtIon And opErAtIon mAnuAL

25-13741-E

January 2020 www.eaton.com

10. Installation

Figure 7. Wiring holes are provided at top of enclosure.

ote:

Do not remove more knockouts than required. Use appropriate glands while

wiring. Recommended glands: AMP – TE Connectivity (178771-3)

5. Wall mounting: Preformed holes are provided to enable wall mounting

of the panel. “Keyhole” design enables quick and simple mounting.

Ensure all mounting points are used to mount the panel securely.

Figure 8. Front view of panel with the hinged user interface removed.

only for clarity of instructions. do not dEtACH tHE unIt.

Top Knockouts

Mounting Holes

200mm

195mm

39mm

281mm

27mm

248mm

Mounting Hole

Rear Knockout

Summary of Contents for VoCALL 16





















































































































Search results

Summary of Contents for VoCALL 16

Reviews:

Related manuals for VoCALL 16

Brands by name

Popular brands

Eaton VoCALL 16, Installation And Operation Manual

Search results

Summary of Contents for VoCALL 16

Reviews:

Related manuals for VoCALL 16

Brands by name

Popular brands