63
Mounting- and Operating Instruction Eaton LoadStar-S JSB
40071860396 March 2021 www.ceag.de
24 CM.1 1,7 A Charging modules
24 CM.1 1,7 A Charging modules
The CM.1 1.7A charging module is suitable for snap moun-
ting on the LoadStar-S module subrack (max. two CM.1
1.7A) and is used in LoadStar-S systems with smaller con-
nected loads such as compact systems.
In order to achieve the recharge time required by the
standard for the projected battery sets, a corresponding
number of charging modules must be projected.
The CM modules have their own calibrated charge control
and function independently of the BCM.1 module. An inte-
grated fan monitoring automatically reports faults in the
technical ventilation.
In order to save energy and extend the service life of the
charging modules, the charging modules are switched
on alternately during trickle charging. The maximum 32
addresses are set at the factory using rotary switches. The
LEDs indicate the operating status of the charging module.
Ready for operation (LED lights up).
25 CM 3,4 A Charging modules
The CM 3.7A charging module is suitable for mounting on
separate charging module subracks with 1 to 8 slots and
is used in LoadStar-S systems with larger connected loads
such as large compact systems or floor standing cabinets
with separate battery accommodation
In order to achieve the recharge time required by the
standard for the projected battery sets, a corresponding
number of charging modules must be projected.
The combination of the CM.1 1.7A and CM 3.4A charging
modules results in the necessary number for each battery
size. In order to save energy and extend the service life of
the charging modules, the charging modules are switched
on alternately during trickle charging.
The CM modules have their own calibrated charge control
and function independently of the BCM.1 module. An inte-
grated fan monitoring automatically reports malfunctions of
the technical ventilation.
The maximum 32 addresses are set at the factory using
rotary switches. The LEDs indicate the operating status of
the charging module. Ready for operation (LED lights up).
Ordering details
type
Description
Order No.
CM.1 1,7A
Charge module 1.7A for rack mounting
40071361580
Ordering details
type
Description
Order No.
CM 3,4A
Charge module 3.4A for rack mounting
40071360370