manualshive.com logo in svg

Eaton LoadStar-S JSB, Mounting And Operating Instruction, Page: 56 / 104

Share
Download
Eaton LoadStar-S JSB Mounting And Operating Instruction Download Page 56

56

Mounting- and Operating Instruction  Eaton LoadStar-S JSB

   40071860396   March 2021   www.ceag.de

20 ACU Module 

Name

Relay 1

Relay 2

Relay 3

Relay 4

Transistor 

output 1

Transistor 

output 2

Mains operation

Mains failure

X

Mains failure SubDB

X

Charging failure

X

Circuit failure

X

X

Luminaire failure

X

Ready

X

Deep discharge protection

X

ISO-Failure

X

Other failures

X

Function test

X

Duration test

X

Safety Source

X

Inverted

X

Use as buzzer

LED Service Pin

Description

Ready for operation (green LED):

The device works without problems.

Safety power source (yellow LED):

The emergency lighting and all internal and external modules are powered by the 

battery.

Faults (red LED):

The device function is disturbed.

Scenario active (orange LED):

An evacuation was triggered via the AE-CU controller.

Service Pin:

To login and logout the ACU module.

ACU settings Relay contacts

Summary of Contents for LoadStar-S JSB









































































































Reviews:

No comments