Eaton LINX, Installation Manual

Page: 88 / 123

R e c e p t i o n S u r f a c e
Tools Required
-5/32” Allen wrench (provided)
-Phillips head screwdriver
1. Using the 5/32” Allen wrench, remove the two
1/4”-20 x .50” Button head cap screws from the
top inner surface of the uprights of each organizer
receiving a
Reception Surface . See Figure 1 . Do
not discard the screws; they will be used in Step 2.
2. Attach a
Support to the top inner surface of each
upright using the 1/4”-20 x .50 Button head cap
screws removed in Step 1. See
Figure 2 .
3. Position the Reception Surface in place on top of the
organizer. Align the pre-drilled holes in the Surface
with the holes in the Supports and fasten in place
with the #10AB x .75” Phillips head screws (provid-
ed). See
Figure 3 .
Reception Surface
Figure 1
Figure 2
Figure 3
1/4”-20 x .50” Button
head cap screws
Do not discard!
Organizer
Upright
1/4”-20 x .50” Button
head cap screws
Support
Reception surface
#10AB x .75” Phillips
head screws
85037
technical furniture
D-21