Eaton LINX, Installation Manual

Page: 33 / 123

Tools Required
-5/32” Allen wrench (provided)
-Phillips head screwdriver
1.Remove the two lower plastic Hole Plugs located on
the inside of each leg and replace them with the two
1/4”- 20 x 3/8” Button head cap screws provided. See
Figure 1 .
2. Loosen the two lower rear phillips head screws located on
the inside of each leg. See
Figure 1 .
3. Install the
Binder Shelf by engaging the forward screws
on the legs into the vertical slots in the Shelf. With the
Shelf resting on the bottom of the Modesty Panel, push
the Shelf toward the Modesty Panel allowing the horizon-
tal slots to engage the screws at the rear and front of the
legs. See
Figure 2 .
Binder Shelf
69281
1/4”-20 x 3/8” Button
head cap screw
Rear phillips head
screw
Figure 1
Hole plug
(remove)
Binder shelf
Workstation
Binder shelf
Workstation
Rear phillips head
screw
Binder shelf
Slots
Figure 2
B i n d e r S h e l f
technical furniture
A-26