Eaton LINX, Installation Manual

Page: 84 / 123

C o r n e r L a m i n a t e
S h e l f
CAUTION : The Workstation Organizer must be securely
attached to a Worksurface before proceeding with the in-
stallation of the
Corner Laminate Shelf .
The Shelf must must be securely attached to the Organizer
before loading items onto it.
Failure to secure the Organizer and the Shelf may cause
tipping and personal injury.
Tools Required
-5/32” Allen wrench (provided)
-Phillips head screw driver
-Electric drill*
-1/8” Dia. drill bit*
* Required for the installation of the WD06-XX,
42”(1067mm) x 42”(1067mm) Shelf only.
CORNER LAMINATE SHELF INSTALLATION
HEIGHTS
The Corner Laminate Shelf may be installed at the
following heights on the 16”(406mm), 32”(813mm),
and 36”(914mm) high Corner Organizers. See
Figure 1 .
Note : To determine the clear height under the Shelf, sub-
tract 1.20”(30mm) from the heights shown below.
Figure 1
20”(508mm)
32”(813mm)
36”(914mm)
16”(406mm)
Corner Laminate Shelf
81571
technical furniture
D-17