101
EA(B)O-6X06
01/2018 Rev. 1
3. Disassembly and Assembly
23. Install the speedometer rotor.
6978
6443
24. Clean the contact faces of the front and rear cases,
removing any signs of the old sealant.
CAUTION!
If either the mainshaft
or countershaft end play has not yet
been adjusted, DO NOT apply sealant
to the housing faces at this point and
provisionally install the rear case with
its retaining screws. Perform the end
play measurement and determine the
number of shims required for adjustment
(see “End Play Adjustment” in this
manual). Otherwise, proceed to the
next step.
25. Apply a continuous sealant string along the contact
surface of either the front or the rear case and install
the rear case.
NOTE: See topic “Tightening Torques and Sealants”
in this manual for the proper application of sealant.
CAUTION!!
Adjustment of mainshaft
and countershaft end-play must be done
BEFORE installing the electro-hydraulic
control unit in the transmission.
Transmission Assembly
