28
EN
8. Connect the clevis without the tubing to the steering arm of the nose
gear assembly.
E-tips
Cut a 1/2-inch (13mm) piece of silicone tubing and slide it on a 2.5mm
hex wrench. The 3mm screw can then be placed in the tubing and
against the hex wrench so it can be easily installed to secure the landing
gear.
E-tips
Always use threadlock on metal-to-metal fasteners to prevent them from
vibrating loose.
9. Secure the nose gear assembly in the fuselage using four 3mm x
8mm socket head screws.
10. Remove the horn from the servo and attach the clevis to the horn.
Place the horn on the servo and check that the steering is centered when
the steering servo is centered. Once the linkage is set, tighten the 2mm
nut against the clevis using pliers so the clevis doesn’t vibrate loose. Slide
the silicone over the forks of the clevis and install the screw to secure the
servo horn to the servo using a #1 Phillips screwdriver.
11. Attach the nose gear cover to the fuselage using a #1 Phillips
screwdriver and the four 2mm x 8mm self-tapping screws removed in
step 1.
E-tips
Add clear tape to both sides of the nose gear door to help secure it to the
fuselage.
12. Select the correct adapter that fits to the landing gear strut. Insert
two adapters in either side of the hub of the wheel.
Summary of Contents for Habu 32 EDF ARF
Page 1: ...Instruction Manual Bedienungsanleitung ...
Page 107: ...107 DE ...