Dynapac CC1000 e, Instruction Manual

Page: 74 / 130

Operation
4812164901_A.pdf 2022-11-14
Check that the rubber elements (4) on the
platform are intact. Worn elements will reduce
comfort. Check that the rubber elements (4) on the
platform are intact. Worn elements will reduce
comfort.
Ensure that the anti-slip (5) on the platform is in
good condition. Replace where anti-slip friction is
poor. Ensure that the anti-slip (5) on the platform is in
good condition. Replace where anti-slip friction is
poor.
Rear view mirror - Adjustment
1
Fig. Rear view mirror
The rear view mirror adjustment is accessible from the
ground or operator´s seat.
The arm of the rear-view mirror has a stop in the
maximum extended position. The mirror may then be
adjusted for a good rear view.
The visibility requirement is fulfilled as per standard
ISO 14401.
The rear view mirror must be clean and adjusted for
good backward visibility.
64