Dynapac CC1000 e, Instruction Manual

Page: 86 / 130

Miscellaneous
4812164901_A.pdf 2022-11-14
1
2
Weight: refer to the machine plate on
the roller
1
Fig. Roller prepared for lifting
1. Lifting point
2. Machine plate
Lifting the roller
The machine’s gross weight (3)is specified on the
machine plate (2). The machine’s gross weight (3)is specified on the
machine plate (2).
Lifting gear such as chains, steel wires, straps,
and lifting hooks must be dimensioned in
accordance with the applicable safety regulations
for lifting devices. Lifting gear such as chains, steel wires, straps,
and lifting hooks must be dimensioned in
accordance with the applicable safety regulations
for lifting devices.
3
Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured. Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured.
Unlocking the articulation
2
3
1
Fig. Articulation
1. Locking pin
2. Locking arm
3. Locking bolt
Remember to unlock the articulation before
operating. Remember to unlock the articulation before
operating.
Pull out the locking pin (1), turn the locking arm (2) for
the rear frame, secure the locking arm by inserting the
locking bolt (3) through the mounting in the rear frame
and locking arm. Insert the locking pin.
76