Dynapac CC1000 e, Instruction Manual

Page: 14 / 130

Safety - General instructions
4812164901_A.pdf 2022-11-14
• Before repairs or service:
- Park the machine.
- Switch off with the ignition key.
- Turn off the battery on/off switch on the instrument panel
- Place chocks by the drums.
- Lock the articulation if required.
- Switch off the battery pack’s service switch when working under the battery
hood. • Before repairs or service:
- Park the machine.
- Switch off with the ignition key.
- Turn off the battery on/off switch on the instrument panel
- Place chocks by the drums.
- Lock the articulation if required.
- Switch off the battery pack’s service switch when working under the battery
hood.
• Modifications to the roller, including the use of any attachment/equipment,
not approved by Dynapac that might compromise safety (including visibility)
are not allowed. Any modifications are only to be made after written approval
has been given by Dynapac. • Modifications to the roller, including the use of any attachment/equipment,
not approved by Dynapac that might compromise safety (including visibility)
are not allowed. Any modifications are only to be made after written approval
has been given by Dynapac.
• Avoid using the roller before the hydraulic fluid has reached its normal
working temperature. Braking distances can be longer than normal when the
fluid is cold. • Avoid using the roller before the hydraulic fluid has reached its normal
working temperature. Braking distances can be longer than normal when the
fluid is cold.
• For your own protection always wear:
- working boots with steel toecaps
- ear protectors
- reflecting clothing/high visibility jacket
Also wear:
- helmet if no cab or FOPS, or if required by worksite management
- working gloves if no cab and for work outside operator´s platform. • For your own protection always wear:
- working boots with steel toecaps
- ear protectors
- reflecting clothing/high visibility jacket
Also wear:
- helmet if no cab or FOPS, or if required by worksite management
- working gloves if no cab and for work outside operator´s platform.
• If the machine seems to be responding abnormally during travel, stop and
check it. • If the machine seems to be responding abnormally during travel, stop and
check it.
4