Dynapac CC1000 e, Instruction Manual

Page: 25 / 130

Technical specifications
4812164901_A.pdf 2022-11-14
Vibration frequency 60 Hz 3,600 rpm Vibration frequency 60 Hz 3,600 rpm
Centrifugal force 13.6 kN 3,060 lb Centrifugal force 13.6 kN 3,060 lb
Note: The amplitude is measured as the real value
and not the nominal.
Propulsion Propulsion
Speed range 0-9 kph 0-5.5 mph Speed range 0-9 kph 0-5.5 mph
Climbing capacity (theoretical) 40 % Climbing capacity (theoretical) 40 %
Tilting ±13 º Tilting ±13 º
General
Electric motor Drivning/Styrning Vibration Electric motor Drivning/Styrning Vibration
Type Permanent magnet Permanent magnet Type Permanent magnet Permanent magnet
Power Power
- kW 10 8.5 - kW 10 8.5
- HP 13.4 11.4 - HP 13.4 11.4
Engine speed 2700 2550 Engine speed 2700 2550
Electrical system Electrical system
Battery type Lithium-ion Battery type Lithium-ion
Battery voltage 48V Battery voltage 48V
Battery capacity 14.6 kWh Battery capacity 14.6 kWh
Charging time 20%-80% 1-phase 230V approx. 6 hours Charging time 20%-80% 1-phase 230V approx. 6 hours
Charging time 20%-80% 3-phase 400V approx. 1.3 hours Charging time 20%-80% 3-phase 400V approx. 1.3 hours
Fuses See the Electrical system section - fuses Fuses See the Electrical system section - fuses
Hydraulic system
Opening pressure MPa Psi Opening pressure MPa Psi
Drive system 35 5,076 Drive system 35 5,076
Supply system 2.0 290 Supply system 2.0 290
Vibration system 20.7 3,002 Vibration system 20.7 3,002
Control systems 9.5 1,378 Control systems 9.5 1,378
Brake disengagement 1.7-3.0 247-435 Brake disengagement 1.7-3.0 247-435
15